Mixed refrigerant compressors for LNG and recovery processes

Connect the main cooling and pre-cooling compressor duties to the cold-box process, heat rejection, and actual refrigerant conditions.

MOON-TECH mixed refrigerant screw compressor package
Mixed refrigerant compressor image supplied by MOON-TECH.

A compressor unit for mixed-refrigerant process loops.

The approved application scope includes small-scale natural gas liquefaction for LNG production, light hydrocarbon recovery, BOG treatment, and helium recovery.

In the described main cooling loop, mixed refrigerant passes through compression, oil separation, high-efficiency oil removal, after-cooling, and return to the cold box.

Main cooling loop
Mixed refrigerant returns to the cold box after compression, oil removal, and after-cooling.
Pre-cooling loop
The described loop uses propane R290 and returns condensed liquid refrigerant to the cold box.
Application scope
Small-scale LNG, light hydrocarbon recovery, BOG treatment, and helium recovery.

Refrigerant composition, cooling duty, cold-box design, and performance remain project-specific.

Separate the main cooling and pre-cooling duties.

The approved source describes two process roles. The engineering review must connect each compressor to the actual cold-box conditions and utility limits.

01

Cold-box return conditions

Provide refrigerant composition and the state leaving the cold box.

02

Compression requirement

Provide required pressure levels, duty range, and operating cases.

03

Oil-removal route

Confirm separation and high-efficiency oil-removal requirements for the process.

04

Heat rejection

Confirm air or water cooling conditions and condenser or after-cooler requirements.

Review the MR loop with project process data.

Share the medium, inlet and outlet conditions, target duty, utilities, and project location. The proposal route starts with verified project inputs.