Waste-heat absorption cooling for a defined steelmaking duty

Connect the available blast-furnace heat source to the required chilled-water duty, then confirm water quality, instrumentation, and integration.

Approved application

Use an available steelmaking heat source to drive cooling.

In the approved application description, heat from the first blast-furnace section drives a lithium-bromide absorption chiller that produces low-temperature chilled water for the third section.

01

Available heat source

Characterize the first-section heat source and its operating variation.

02

Absorption chiller

Review the lithium-bromide absorption configuration against the actual heat and cooling duties.

03

Chilled-water duty

Define the low-temperature water requirement for the third section.

04

Water-side controls

Include water-quality treatment and instrumentation near the relevant inlets and outlets.

Water quality is part of heat-transfer reliability

For the described absorption chiller, poor water quality requires treatment to reduce scale deposition and tube corrosion.

Measure near the interfaces

The approved installation requirement places thermometers and pressure gauges near the relevant water inlets and outlets.

Do not infer savings

The approved knowledge does not state a universal energy-saving percentage, payback period, cooling capacity, or project result.

Confirm the site arrangement

Heat-source stability, water conditions, target duty, utilities, controls, and integration must be confirmed for the actual steelmaking process.

Review the available waste heat and chilled-water duty.

Share the medium, inlet and outlet conditions, target duty, utilities, and project location. The proposal route starts with verified project inputs.