BOG compressors for LNG storage and gas recovery routes

Match the compressor train to the boil-off gas composition, inlet state, required outlet state, and downstream destination.

MOON-TECH BOG screw compressor package
BOG compressor image supplied by MOON-TECH.

Pressurize boil-off gas for the next process step.

In the approved LNG process, the BOG compressor pressurizes gaseous BOG from the storage tank for combustion, pipeline transport, or return to the cold box for reliquefaction.

The described train moves through heating, buffering, inlet filtration, two compression stages, oil separation, high-efficiency oil removal, after-cooling, and process-gas discharge.

Listed inlet pressure
0 to 0.5 MPa(G)
Listed outlet pressure
0.5 to 4.5 MPa(G)
Listed inlet temperature
Above -50°C
Listed outlet temperature
Below 50°C when ambient temperature is at or below 40°C
Listed flow regulation
10 to 100 percent, using slide-valve regulation and optional combined variable-frequency control

These values are from the approved product information and do not mean every gas composition, model, or project covers the full range.

Define the compressor around the gas and destination.

The same BOG label can lead to different process destinations. Selection begins with composition, flow range, inlet state, outlet requirement, and the destination after compression.

01

Characterize the BOG

Provide gas composition, contaminants, and expected operating envelope.

02

State the inlet

Provide pressure, temperature, flow range, and storage behavior.

03

State the destination

Identify combustion, pipeline transport, or return to the cold box for reliquefaction.

04

Confirm utilities and controls

Provide ambient conditions, cooling utilities, power supply, and control requirements.

Send the BOG composition and pressure route.

Share the medium, inlet and outlet conditions, target duty, utilities, and project location. The proposal route starts with verified project inputs.