Industrial CO2 compressors for recovery and pressurization

Screen the screw compressor arrangement against the gas source, pressure route, cooling utilities, and downstream process.

MOON-TECH screw CO2 compressor unit
Screw CO2 compressor image supplied by MOON-TECH.

Pressurize recovered CO2 for the specified process.

MOON-TECH screw CO2 compressor units are used for CO2 recovery and pressurization across the approved petroleum, petrochemical, natural gas, coal, chemical, synthetic-ammonia, power, steel, and food-fermentation scope.

The product information lists single-stage and dual-stage arrangements within the stated pressure boundaries.

Listed suction pressure
0.04 to 2.0 MPa(a)
Listed exhaust pressure
Up to 5.2 MPa(a)
Compression arrangement
Single-stage or dual-stage
Approved use
CO2 recovery and pressurization within the listed industrial application scope

The listed working conditions are screening boundaries from product information. Final selection depends on gas composition, flow, cooling, pressure ratio, and project requirements.

Keep compressor selection separate from product-grade claims.

Compression pressure is one part of the process. The website does not claim that one configuration automatically meets every industrial, food, transport, or sequestration requirement.

Gas source and composition

State the source, CO2 concentration, impurities, moisture, and expected variation.

Pressure route

Provide suction pressure, required discharge pressure, and the single-stage or dual-stage review case.

Cooling and condensation

Identify available cooling utilities and whether the compressor feeds a liquefaction process.

Operating envelope

Provide normal, minimum, maximum, start-up, and upset cases for engineering review.

Send the CO2 composition and pressure requirement.

Share the medium, inlet and outlet conditions, target duty, utilities, and project location. The proposal route starts with verified project inputs.